How to Use a Shock Pump? (In Detail Guide!)

A shock pump is an important piece of equipment for mountain bikers and cyclists. It allows you to quickly and easily add air to your suspension system, which can improve the handling and performance of your bike. In this blog post, we will discuss how to use a shock pump properly so that you can get the most out of your ride!

What Are Shock Pumps and what does it do?

Shock pumps are devices that are used to inflate or adjust the air pressure in shocks. Most mountain bikes have shocks with adjustable air pressure. The typical range is between 20 and 35 PSI. Some road bikes also have shocks, but they generally have a fixed air pressure that cannot be adjusted.

Why Would You Use a Shock Pump?

There are two main reasons for using a shock pump: to inflate your shocks after changing the air spring volume, or to adjust the air pressure to fine-tune the ride characteristics of your bike.

How to use a shock pump?

If you’re looking to get the most out of your suspension, a shock pump is an essential tool. Here’s a quick guide on how to use one:

Attach Pump:

First, attach the pump to the valve on your shock. Make sure that the connection is secure before proceeding.

Start Pumping:

Next, start pumping the handle up and down. You’ll feel resistance as the air starts filling up the shock. Continue until you reach the desired pressure.

Detach the pump:

Once you’ve reached the desired pressure, detach the pump and check for any leaks. If everything looks good, you’re all set! Now go enjoy those smoother trails!

If you find yourself having to frequently add air to your shocks, it might be time for a tune-up. talk to your local bike shop about getting your suspension serviced. They’ll be able to help you get it dialed in for optimal performance.

Tips for getting the most out of your shock pump:

To get the most out of your shock pump, follow these tips:

  • Use a high-pressure pump to fill your shocks quickly and easily.
  • Check the pressure regularly to ensure that your shocks are always properly inflated.
  • Use a shock pump specifically designed for air shocks to get the best results.

With these tips in mind, you’ll be able to make the most out of your shock pump and keep your air shocks in great condition.

Shock pump maintenance:

To keep your shock pump in good working condition, it is important to perform regular maintenance. At least once a year, disassemble the pump and clean all of the parts. Inspect the o-rings and replace them if they are worn or damaged. Lubricate the moving parts with a light oil before reassembling the pump.

It is also a good idea to check your shock pump regularly for leaks. If you notice any leaking, immediately stop using the pump and investigate the cause. Do not use the pump until you have fixed the problem to prevent further damage.

Shock pumps are an essential piece of equipment for any mountain biker. With proper care and maintenance, they will last for many years.

How often should you use a shock pump?

After Every 20 To 30 Hours Of riding, You should use a shock pump to check for proper air pressure in your shocks. If you have any doubts, err on the side of too much air pressure rather than too little. Too little air pressure will cause your shocks to bottom out, which can damage them.

To use a shock pump:

  • First, unscrew the cap from the valve stem on your shock.
  • Next, place the pump head onto the valve stem and screw it on snugly.
  • Now, start pumping! The needle on the gauge will tell you how much air pressure is in your shock. Pump until it reaches the recommended amount of pressure for your specific shock model.
  • Once you’ve reached the correct air pressure, unscrew the pump head and replace the cap on the valve stem.
  • That’s it! You’re now ready to hit the trails with properly inflated shocks.

Can you use a regular pump as a shock pump?

No, you cannot use a regular pump as a shock pump. Shock pumps are designed to deliver air at high pressures, which regular pumps are not capable of doing. Additionally, shock pumps have features that make them specifically designed for shocks, such as Schrader valves and high-pressure gauges.

No matter what type of mountain bike you have, using a shock pump is an important part of keeping your suspension in good working condition.

Do you have to use a shock pump?

Yes, if you want your bike to have a comfortable ride. A shock pump is used to inflate the air chamber in your suspension fork or rear shock. This sets the preload, which alters how much force is required to compress the spring. In other words, it changes how soft or firm your ride is.